Crysis 3

Still one of our most punishing benchmarks 3 years later, Crysis 3 needs no introduction. Crytek’s DX11 masterpiece, Crysis 3’s Very High settings still punish even the best of video cards, never mind the rest. Along with its high performance requirements, Crysis 3 is a rather balanced game in terms of power consumption and vendor optimizations. As a result it can give us a good look at how our video cards stack up on average, and later on in this article how power consumption plays out.

Crysis 3 - 3840x2160 - Very High Quality + FXAA

Crysis 3 - 2560x1440 - Very High Quality + FXAA

Crysis 3 will vex cards at 4K for at least one more generation. At 48.9fps, the GTX 1080 Ti is the fastest of the bunch, and is starting to approach the 60fps mark. Still, even with a 36% performance lead over the GTX 1080 and a 77% performance lead over the GTX 980 Ti, 60fps is a bit more than any one card can handle.

Battlefield 4 The Witcher 3
Comments Locked

161 Comments

View All Comments

  • Jon Tseng - Thursday, March 9, 2017 - link

    Launch day Anandtech review?

    My my wonders never cease! :-)
  • Ryan Smith - Thursday, March 9, 2017 - link

    For my next trick, watch me pull a rabbit out of my hat.
  • blanarahul - Thursday, March 9, 2017 - link

    Ooh.
  • YukaKun - Thursday, March 9, 2017 - link

    /claps

    Good article as usual.

    Cheers!
  • Yaldabaoth - Thursday, March 9, 2017 - link

    Rocky: "Again?"
  • Ryan Smith - Thursday, March 9, 2017 - link

    No doubt about it. I gotta get another hat.
  • Anonymous Blowhard - Thursday, March 9, 2017 - link

    And now here's something we hope you'll really like.
  • close - Friday, March 10, 2017 - link

    Quick question: shouldn't the memory clock in the table on the fist page be expressed in Hz instead of bps being a clock and all? Or you could go with throughput but that would be just shy of 500GBps I think...
  • Ryan Smith - Friday, March 10, 2017 - link

    Good question. Because of the various clocks within GDDR5(X)*, memory manufacturers prefer that we list the speed as bandwidth per pin instead of frequency. The end result is that the unit is in bps rather than Hz.

    * http://images.anandtech.com/doci/10325/GDDR5X_Cloc...
  • close - Friday, March 10, 2017 - link

    Probably due to the QDR part that's not obvious from reading a just the frequency. Thanks.

Log in

Don't have an account? Sign up now